Features:
1. The machine is used for cutting all kinds of spline shafts with spur or helical gears, link shaft gears with spur or helical gears, tapered splines and stepped gears by hobbing.
2. It adops AC servo system to control longitudinal or transverse locating of hobbing head, change the actions, change hob speed (stepless), adjust hob automatically, and it can realize dry-hobbing, it features with good reliability and fine protection.
3. This is a high efficient machine for cutting splines and gears in batches or mass production, and it is suitable for mass or large batch production and suitable for make the automobile, tractors, shipping and mining machine or machine building industries etc.
Specification | HMK6050 | HMK6063 | YK60120 |
Max.diameter to be machined | Φ500 mm | Φ630 mm | Φ1200 mm |
Max.module to be machined | 14 mm | 16 mm | hob milling 30 |
Max.length of the workpiece | 3000~6000 | 3000~6000 | 3000~6000 |
Max.length to be machined | 2500~5500 | 2500~5500 | 2500~5500 |
Range of teeth to be machined | Arbitrary | Arbitrary | Arbitrary |
Center hight of machine | 600mm | 600mm | 1050mm |
Max. Size of milling cutter to be mounted | Φ220×250 | Φ240×270 | Φ360×400 |
Max.travel of tailstock sleeve | 100 | 100 | 100 |
Adjusting angle of milling head | ±45° | ±45° | ±45° |
No. of axes to be countrolled | 4~6 axis | 4~6 axis | 4~6 axis |
No. of axes to be followed | 4 axis | 4 axis | 4 axis |
Gears to be machined | straight teeth / helical teeth | straight teeth / helical teeth | straight teeth / helical teeth |
Overall dimensions (L×W×H) | 8300×2465×2354 | 8300×2500×2400 | 8300×4200×3100 |
Weight of the machine | 25500kg | 26000kg | 60000kg |